Choosing Upvc Window Replacement Hinges
Choosing and fitting upvc window replacement hinges isn't as difficult as you think. It is essential to verify that the arrows on the hinges are facing the right way and also the thickness (13mm or 17mm) of the hinge arm on the open frame.
There are many different kinds of hinges to pick from, each one with distinctive features. This article will review the most popular uPVC hinges, and their benefits.
Egress/Easy Clean Hinge
They are an excellent choice for replacing or upgrading a fire escape safety window, as they are able to open at a 90-degree angle. They can also be removed to an 'easy clean' position so that you can easily access the outside of your windows to clean them without having to climb on a ladder or lean over at potentially hazardous angles.
Yale is one of the most trusted and well-known brands in the home security industry. These hinges are compatible with any kind of uPVC side hung window. They can be moved into the easy-to-clean position by pressing an unassuming button, and then moving the window sash to one side. Once closed, the window sash will be returned to its original position.
They are available in both 13mm and 17mm stack heights. Based on the size of your existing window, we suggest using our Egress Selection Guide to determine which product is best for your needs.
These hinges can be used with standard side-hung frames made of uPVC, or aluminium. They are equipped with a simple friction screw to adjust the amount of resistance that is generated. This allows for easier opening of the window and reduces the chance of a mishap during severe winds. They have been cycle tested to over 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.
Without buttons or catches, There are no buttons or catches. Nico Egress Easy Clean Friction Hinge is simple to use and provides a simple solution to emergency egress as well as safe cleaning. Press the hinge retention clip located on the inner corner of the bottom corner. This will release the bottom and top catches and allow you to move the sash back into the clean position. Close winchester door hinge repair when you have the sash in an easy-cleaning position. This will reset the hinges to their exit positions.
Fire-Escape Hinge
Fire Escape Hinges commonly referred to as "Easy Clean" hinges are used to replace side-opening windows for escape (fire safety) reasons. These hinges allow for a larger opening in the event of fire. This kind of hinge is legal in any habitable room that has a window, as stipulated by building regulations.
The windows feature the benefit of a friction stop that allows the windows to open up to 90 degrees. They also allow the opening sash to slide over the glass when it is opened and allows for simple cleaning without the need to use ladders. The hinges are simple to operate and don't have complicated buttons or catches. They can be operated from inside of the house using a simple, safe lever.
The hinges are made in the UK by Cotswold and come with a child safety restrictor for day to day use which can be turned off by a hidden button, giving you peace of mind that your children won't accidentally open the door too far. They are available in 13mm and 17mm stack heights.
To order these hinges simply take a measurement of the length of your current side hung window hinge that is fixed to the frame (see the article on measuring the length of your window hinges made of upvc). Choose the right size hinge below.
Note that this measurement is taken from the part of the hinge that is attached to the frame, not the sash. The actual hinge length can be longer or shorter depending on how your old windows were manufactured. When choosing the size of your hinge, most windows made of upvc will have a 13mm stack height. However, should your window frame is 17mm wide, you should select the option for this. You can also install the 4mm packer to make up for the difference. All hinges come in two different directions (1 left and one right). The hinges do not include screws. If required, these can be purchased separately. We recommend using our Upvc window hinge repair screws. These screws are designed to increase your hinges' performance and allow them to operate efficiently for a longer. They feature a less friction design and a better weather seal with a new nylon reducer cap.
Restricted Hinge
There are occasions windows need to completely open, and this can be a problem using a standard hinge. These child safety friction hinges are a great solution to this issue. They can be used when ventilation is required but cleaning or escape from a fire is not feasible. They limit the number of times you can opening the sash, and permit the override of this limitation by pressing the button. They can be used for side- and top-hung windows and are available in 13mm and 17mm stack heights.
The Nico Restricted Egress Friction Hinge blends the advantages of a standard restrictor with a fire escape hinge to provide an effective and simple way to comply with building regulations. It is available in 13mm and 17mm stack heights and can be used for both side and top opening uPVC window. It is available as a pair of hinges where one hinge is the restricted egress and the second is unrestricted allowing one of these to be fitted on the bottom of the sash while the other is attached to the top.

These uPVC hinges are designed to be used on windows that cannot be fully opened, for instance bedrooms for children. The mechanism limits the extent to which the sash can open to 100mm for safety and then re-engages when the window is closed.
These uPVC friction-style hinges can be used on all kinds of windows. They are especially useful for windows that are hard to reach, like those in three-storey homes or those which would require a ladder. They can be combined with our range of security features like hinge guard protection plates or dog bolts to offer PAS 24 performance.
It is important to measure the hinge on your current window to be able to find replacements of the same size. The easiest way to do this is by viewing the hinge in the image gallery and determining the best place for it to be. Top hung hinges can be restricted on both sides, while side-hung hinges are only restricted only on one side.
Standard Hinge
A standard hinge uses metal-to-metal contact and no extra components to reduce friction. It is available in many finishes and also comes with an NFPA-certified fire rating. To quickly determine the radius of hinges, lay them out flat and align a quarter dime in two corners. If the dime is more snug than the quarter, the corner is rounded by 1/4 inch. If the quarter fits better, it's rounded by 5/8 inch.
The proper hinge can enhance or break the look of your door. The style and design of your hinges to your door will create a cohesive and attractive appearance.